Of course not an ideal performance, but for home use the most it.
A***v
15 Dec 2021
Verified Buyer
Powered by lr44. Unfortunately, those three pieces of batteries that I did not work. I'll buy new ones and add a review until I turn on.
S***g
14 Dec 2021
Verified Buyer
The main thing works))
2***г
14 Dec 2021
Verified Buyer
Works for sure! On the photo chipboard 16mm
A***v
11 Dec 2021
Verified Buyer
It came very quickly true without botoreyka until I checked. Plastic budget for that use will go
V***n
6 Dec 2021
Verified Buyer
From plastic, I did not expect anything else. Flimsy. Sponges for external measurements are not tightly washed off,-have bulges in the middle of the planes. Sponges for internal measurements do not shift to zero. When compared with the usual "our" bar shc-1, when measuring holes lies in a smaller side by 0,5mm. The depth gauge initially sticks out 0,8mm. Better of course, than vice versa, you can grind: first to achieve a tight fit of large sponges, and then already to peel the sponges for holes, and Shorten. But I will not bother, because. I took it to accommodate on the Pinol of the tailstock of the lathe, and there even dozens are not very necessary... Oh, yes, you'll get the off bar on,-it turns on, but after 3-4 minutes, it turns off itself. It is good, saves battery (lr-44)
G***o
3 Dec 2021
Verified Buyer
Everything works all well sorry that plastic
D***o
2 Dec 2021
Verified Buyer
Well packed. Works.
K***v
29 Nov 2021
Verified Buyer
The plastic bar has a scale up to ten and the accuracy is not very much for more accurate works I advise you to take the same size from the metal when you press the photo at. Not even bad.
J***o
28 Nov 2021
Verified Buyer
Top
O***o
19 Nov 2021
Verified Buyer
The order came quickly, but did not check whether or not.
I***V
16 Nov 2021
Verified Buyer
Пластик мягкий, но показывает правильно..
F***o
22 Sep 2021
Verified Buyer
I haven't tried it yet since it doesn't include batteries, everything else looks good.
Customer
21 Sep 2021
Verified Buyer
Arrived as the description.
R***n
7 Sep 2021
Verified Buyer
Работает , уже хорошо ) батарейки в комплекте нет. Сравнивал с обычным (дорогим штангелем), вроде врет в пределах 2 мм (в меньшую сторону), после замера латунной стойки pchsn-20 размер попадает идеально. Для дома и не слишком требовательных задач пойдёт за глаза. Позже дополню, если будет брехать в показаниях
A***a
4 Aug 2021
Verified Buyer
Cool caliper. Works well, the error if there is, then the minimum. For strongly accurate measurements will not work.
ok
Of course not an ideal performance, but for home use the most it.
Powered by lr44. Unfortunately, those three pieces of batteries that I did not work. I'll buy new ones and add a review until I turn on.
The main thing works))
Works for sure! On the photo chipboard 16mm
It came very quickly true without botoreyka until I checked. Plastic budget for that use will go
From plastic, I did not expect anything else. Flimsy. Sponges for external measurements are not tightly washed off,-have bulges in the middle of the planes. Sponges for internal measurements do not shift to zero. When compared with the usual "our" bar shc-1, when measuring holes lies in a smaller side by 0,5mm. The depth gauge initially sticks out 0,8mm. Better of course, than vice versa, you can grind: first to achieve a tight fit of large sponges, and then already to peel the sponges for holes, and Shorten. But I will not bother, because. I took it to accommodate on the Pinol of the tailstock of the lathe, and there even dozens are not very necessary... Oh, yes, you'll get the off bar on,-it turns on, but after 3-4 minutes, it turns off itself. It is good, saves battery (lr-44)
Everything works all well sorry that plastic
Well packed. Works.
The plastic bar has a scale up to ten and the accuracy is not very much for more accurate works I advise you to take the same size from the metal when you press the photo at. Not even bad.
Top
The order came quickly, but did not check whether or not.
Пластик мягкий, но показывает правильно..
I haven't tried it yet since it doesn't include batteries, everything else looks good.
Arrived as the description.
Работает , уже хорошо ) батарейки в комплекте нет. Сравнивал с обычным (дорогим штангелем), вроде врет в пределах 2 мм (в меньшую сторону), после замера латунной стойки pchsn-20 размер попадает идеально. Для дома и не слишком требовательных задач пойдёт за глаза. Позже дополню, если будет брехать в показаниях
Cool caliper. Works well, the error if there is, then the minimum. For strongly accurate measurements will not work.